message Contact Us
home Home / Blog / Robot Buying Guides
Hot Tags
What “Unattended” Cleaning Really Requires: Charging, Water, Drainage, Elevators, and Exception Handling
A cleaning robot that navigates autonomously is not the same as a cleaning robot that operates unattended. The difference is not navigation — it is everything else the site must ...
ByAIsirRobot Research Team
2026-09-02
Mobile Robot Battery Specifications: How to Compare Wh, Runtime, Charge Time, Cycle Life, and Duty Cycle
When a mobile robot datasheet states “8 hours runtime” or “2,000 cycle life,” those numbers are only meaningful if you know the conditions under which they were measured. A robot ...
ByAIsirRobot Research Team
2026-09-02
Exoskeleton Torque Explained: Why a Higher Nm Rating Does Not Automatically Mean Better Walking Assistance
When you compare walking-assistance exoskeletons, the first specification most datasheets highlight is torque in Nm. A device rated at 24 Nm sounds more powerful than one rated at 12 Nm ...
ByAIsirRobot Research Team
2026-09-02
Robot Gripper Selection Guide: Vacuum, Mechanical, Magnetic, and Soft Grippers Compared
The gripper is the part of the robot that actually touches your product. Get it wrong, and the most precise robot arm with the best vision system will still drop ...
ByAIsirRobot Research Team
2026-09-02
Rehabilitation Robot Procurement Checklist: Regulatory Status, Clinical Evidence, Training, Service, and Spare Parts
Buying a rehabilitation robot is not like buying a warehouse robot. Many rehabilitation robots intended for diagnosis, treatment, or rehabilitation purposes are regulated as medical devices, but regulatory status depends ...
ByAIsirRobot Research Team
2026-09-02
Mobile Robot Chassis Buying Guide for OEMs and Integrators: Payload, APIs, Navigation, Power, and Expansion
A mobile robot chassis is not a finished AMR. It is a development platform — a mechanical base with drive, power, sensors, and varying levels of software access that lets ...
ByAIsirRobot Research Team
2026-09-02
Cobot Cell Cost Breakdown: Robot Arm, EOAT, Fixtures, Safety, Integration, and Commissioning
A collaborative robot arm priced at $26,000 can become a$135,000 installed cell before it picks up its first part. In the illustrative example below, the robot arm accounts for about ...
ByAIsirRobot Research Team
2026-09-02
Autonomous Forklift Buying Guide: Pallets, Load Center, Lift Height, Aisles, Docking, and Safety
An autonomous forklift is not a forklift that drives itself to a pallet and picks it up. It is a system that depends on pallet type, load center, floor geometry, ...
ByAIsirRobot Research Team
2026-09-02
Buy, Lease, or Robot-as-a-Service (RaaS)? How Buyers Should Compare Robot Commercial Models
The same robot can be purchased outright, leased for a fixed term, or operated as a service with a recurring fee. Each commercial model shifts the cost structure, risk allocation, ...
ByAIsirRobot Research Team
2026-09-01
How to Run a Low-Risk Robot Pilot Before a Full Purchase: Scope, Metrics, and Acceptance Criteria
A pilot is not a demo. A demo shows what a robot can do under controlled conditions. A pilot tests whether a robot can do what your operation actually requires ...
ByAIsirRobot Research Team
2026-09-01
How to Compare Robot Vendors: A Requirement-Based Scorecard
Brand recognition should not be used as a proxy for requirement fit. A well-known brand does not guarantee that a specific robot meets the buyer’s payload, reach, speed, integration, or ...
ByAIsirRobot Research Team
2026-09-01
How to Evaluate Robot Supplier Support Before a Global Rollout
Product specifications tell you what a robot can do. Supplier support determines whether it keeps doing it after deployment. For a global rollout, the support model matters as much as ...
ByAIsirRobot Research Team
2026-09-01
  • 1
  • 2